Maximus Double-Front Pole Vault Landing System
Where facility design (and budget) allows, a double-front landing system is the way to go. Performance (and safety) in the pole vault can be greatly affected by wind direction. The double-front landing system allows for instant runway approach direction change to take full advantage of prevailing winds.Overall size: 21′ 6″ x 30′ x 32″Overall metric: 6.55m x 9.14m x .81m(3) Base Units: 7′ 2″ x 16′ x 30″(2) Front Tri-slant units: 8’3″ x 6′ x 30″ to 16″(2) Front Extensions: 9’6″ x 8′ x 16″(1) Top Pad Unit: 21′ x 29′ 8″ x 2″19’10” in back of the vault box.Meets High School, NCAA, and IAAF specifications.There is no actual image of this item. The image shown is representative only. The actual item will be a double front landing system.Landing Systems Specifications10 Year WarrantyGill is committed to your Track & Field programs, now, and ten years from now. That’s why all of Gill’s landing systems come with a full 10 year warranty. If any failure occurs in the first 10 years, under normal use and care, they will repair or replace the damaged part. ValueAfter considering the characteristics of design, appearance, functionality, warranty and price, the value of Gill’s landing systems becomes obvious. No other company can compare to their price-per-feature value. MaterialsFoam: Select density gray polyurethane foam offers superior resistance to UV deterioration. Fabric: 18 oz. vinyl coated woven polyester for maximum durability and a puncture resistance of 390 psi. Unlike vinyl coated nylon, which can expand and contract over 12%, this fabric holds its shape under the worst conditions. All section seams are heat sealed for water resistance. Velcro®: Avionic grade hook and loop material exceeds grip requirements even after 5000 assembly cycles. Covers: The weather and ground covers use the same super strong vinyl coated woven polyester as used in our pit casings with top and bottom heat sealed seams to keep moisture out. Mesh: Top of base units are made of vinyl coated woven polyester mesh for superior strength. The mesh top allows for the desired escape of air which provides optimal landing compression. Seams: Extra heavy #138 nylon thread is used throughout. Seams are folded and triple stitched then welded together using a high frequency heat sealer to increase strength and provide water resistance. D-ring straps are back stitched for added holding power. Hardware: Zinc plated snap-hooks and stainless steel D-rings ensure placement of top pad. Heavy duty pl